/*
 * @Author: ilikara 3435193369@qq.com
 * @Date: 2024-10-11 06:20:04
 * @LastEditors: ilikara 3435193369@qq.com
 * @LastEditTime: 2024-12-01 03:48:28
 * @FilePath: /smartcar/lib/encoder.h
 * @Description: 
 * 
 * Copyright (c) 2024 by ilikara 3435193369@qq.com, All Rights Reserved. 
 */
#ifndef ENCODER_H
#define ENCODER_H

#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
#include <string.h>

#include "GPIO.h"

#define PWM_BASE_ADDR 0x1611B000
#define PWM_OFFSET 0x10
#define LOW_BUFFER_OFFSET 0x4
#define FULL_BUFFER_OFFSET 0x8
#define CONTROL_REG_OFFSET 0xC

#define CNTR_ENABLE_BIT (1 << 0)       // 计数器使能
#define PULSE_OUT_ENABLE_BIT (1 << 3)  // 脉冲输出使能（低有效）
#define SINGLE_PULSE_BIT (1 << 4)      // 单脉冲控制位
#define INT_ENABLE_BIT (1 << 5)        // 中断使能
#define INT_STATUS_BIT (1 << 6)        // 中断状态
#define COUNTER_RESET_BIT (1 << 7)     // 计数器重置
#define MEASURE_PULSE_BIT (1 << 8)     // 测量脉冲使能
#define INVERT_OUTPUT_BIT (1 << 9)     // 输出翻转使能
#define DEAD_ZONE_ENABLE_BIT (1 << 10) // 防死区使能

#define LOW_BUFFER_ADDR (PWM_BASE_ADDR + LOW_BUFFER_OFFSET)
#define FULL_BUFFER_ADDR (PWM_BASE_ADDR + FULL_BUFFER_OFFSET)
#define CONTROL_REG_ADDR (PWM_BASE_ADDR + CONTROL_REG_OFFSET)

#define GPIO_PIN 73
#define GPIO_PATH "/sys/class/gpio/gpio73/value"

#define PAGE_SIZE 0x10000

#define REG_READ(addr) (*(volatile uint32_t *)(addr))
#define REG_WRITE(addr, val) (*(volatile uint32_t *)(addr) = (val))

class ENCODER
{

public:
    ENCODER(int pwmNum, int gpioNum);
    ~ENCODER();

    double pulse_counter_update(void);

private:
    uint32_t base_addr;
    GPIO directionGPIO;
    void *low_buffer;
    void *full_buffer;
    void *control_buffer;
    void *map_register(uint32_t physical_address, size_t size);
    void PWM_Init(void);
    void reset_counter(void);
};

#endif