C路: VL53L0X 用户态I2C直驱 + 高速模式 29.6fps
- 搬运 ST API C 源码到 lib/vl53l0x/, 替换 I2C 层为用户态 i2c-dev - 新增 vl53l0x_platform_user.cpp: WriteMulti/ReadMulti 等全平台接口 - 重写 vl53l0x.cpp: start时unbind内核驱动, 单次测距, 无后台轮询 - 高速模式 20000μs timing budget, 模型缓存零污染(41-43ms) - LiDAR 每5帧一读(~20ms), 隔帧模型推理, fps 25.1→29.6 (+18%) - 同事的LiDAR避障集成: 12个配置参数, 中线变形绕行, 刹车注释 - nice -10 + sched_yield 优先级优化
This commit is contained in:
spdis
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,85 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef _VL53L0X_API_CALIBRATION_H_
|
||||
#define _VL53L0X_API_CALIBRATION_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
#include "vl53l0x_platform.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
VL53L0X_Error VL53L0X_perform_xtalk_calibration(VL53L0X_DEV Dev,
|
||||
FixPoint1616_t XTalkCalDistance,
|
||||
FixPoint1616_t *pXTalkCompensationRateMegaCps);
|
||||
|
||||
VL53L0X_Error VL53L0X_perform_offset_calibration(VL53L0X_DEV Dev,
|
||||
FixPoint1616_t CalDistanceMilliMeter,
|
||||
int32_t *pOffsetMicroMeter);
|
||||
|
||||
VL53L0X_Error VL53L0X_set_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
|
||||
int32_t OffsetCalibrationDataMicroMeter);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
|
||||
int32_t *pOffsetCalibrationDataMicroMeter);
|
||||
|
||||
VL53L0X_Error VL53L0X_apply_offset_adjustment(VL53L0X_DEV Dev);
|
||||
|
||||
VL53L0X_Error VL53L0X_perform_ref_spad_management(VL53L0X_DEV Dev,
|
||||
uint32_t *refSpadCount, uint8_t *isApertureSpads);
|
||||
|
||||
VL53L0X_Error VL53L0X_set_reference_spads(VL53L0X_DEV Dev,
|
||||
uint32_t count, uint8_t isApertureSpads);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_reference_spads(VL53L0X_DEV Dev,
|
||||
uint32_t *pSpadCount, uint8_t *pIsApertureSpads);
|
||||
|
||||
VL53L0X_Error VL53L0X_perform_phase_calibration(VL53L0X_DEV Dev,
|
||||
uint8_t *pPhaseCal, const uint8_t get_data_enable,
|
||||
const uint8_t restore_config);
|
||||
|
||||
VL53L0X_Error VL53L0X_perform_ref_calibration(VL53L0X_DEV Dev,
|
||||
uint8_t *pVhvSettings, uint8_t *pPhaseCal, uint8_t get_data_enable);
|
||||
|
||||
VL53L0X_Error VL53L0X_set_ref_calibration(VL53L0X_DEV Dev,
|
||||
uint8_t VhvSettings, uint8_t PhaseCal);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_ref_calibration(VL53L0X_DEV Dev,
|
||||
uint8_t *pVhvSettings, uint8_t *pPhaseCal);
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _VL53L0X_API_CALIBRATION_H_ */
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,113 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef _VL53L0X_API_CORE_H_
|
||||
#define _VL53L0X_API_CORE_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
#include "vl53l0x_platform.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
VL53L0X_Error VL53L0X_reverse_bytes(uint8_t *data, uint32_t size);
|
||||
|
||||
VL53L0X_Error VL53L0X_measurement_poll_for_completion(VL53L0X_DEV Dev);
|
||||
|
||||
uint8_t VL53L0X_encode_vcsel_period(uint8_t vcsel_period_pclks);
|
||||
|
||||
uint8_t VL53L0X_decode_vcsel_period(uint8_t vcsel_period_reg);
|
||||
|
||||
uint32_t VL53L0X_isqrt(uint32_t num);
|
||||
|
||||
uint32_t VL53L0X_quadrature_sum(uint32_t a, uint32_t b);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_info_from_device(VL53L0X_DEV Dev, uint8_t option);
|
||||
|
||||
VL53L0X_Error VL53L0X_set_vcsel_pulse_period(VL53L0X_DEV Dev,
|
||||
VL53L0X_VcselPeriod VcselPeriodType, uint8_t VCSELPulsePeriodPCLK);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_vcsel_pulse_period(VL53L0X_DEV Dev,
|
||||
VL53L0X_VcselPeriod VcselPeriodType, uint8_t *pVCSELPulsePeriodPCLK);
|
||||
|
||||
uint32_t VL53L0X_decode_timeout(uint16_t encoded_timeout);
|
||||
|
||||
VL53L0X_Error get_sequence_step_timeout(VL53L0X_DEV Dev,
|
||||
VL53L0X_SequenceStepId SequenceStepId,
|
||||
uint32_t *pTimeOutMicroSecs);
|
||||
|
||||
VL53L0X_Error set_sequence_step_timeout(VL53L0X_DEV Dev,
|
||||
VL53L0X_SequenceStepId SequenceStepId,
|
||||
uint32_t TimeOutMicroSecs);
|
||||
|
||||
VL53L0X_Error VL53L0X_set_measurement_timing_budget_micro_seconds(
|
||||
VL53L0X_DEV Dev,
|
||||
uint32_t MeasurementTimingBudgetMicroSeconds);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_measurement_timing_budget_micro_seconds(
|
||||
VL53L0X_DEV Dev,
|
||||
uint32_t *pMeasurementTimingBudgetMicroSeconds);
|
||||
|
||||
VL53L0X_Error VL53L0X_load_tuning_settings(VL53L0X_DEV Dev,
|
||||
uint8_t *pTuningSettingBuffer);
|
||||
|
||||
VL53L0X_Error VL53L0X_calc_sigma_estimate(VL53L0X_DEV Dev,
|
||||
VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
|
||||
FixPoint1616_t *pSigmaEstimate);
|
||||
|
||||
VL53L0X_Error VL53L0X_calc_dmax(
|
||||
VL53L0X_DEV Dev, FixPoint1616_t ambRateMeas, uint32_t *pdmax_mm);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_total_xtalk_rate(VL53L0X_DEV Dev,
|
||||
VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
|
||||
FixPoint1616_t *ptotal_xtalk_rate_mcps);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_total_signal_rate(VL53L0X_DEV Dev,
|
||||
VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
|
||||
FixPoint1616_t *ptotal_signal_rate_mcps);
|
||||
|
||||
VL53L0X_Error VL53L0X_get_pal_range_status(VL53L0X_DEV Dev,
|
||||
uint8_t DeviceRangeStatus,
|
||||
FixPoint1616_t SignalRate,
|
||||
uint16_t EffectiveSpadRtnCount,
|
||||
VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
|
||||
uint8_t *pPalRangeStatus);
|
||||
|
||||
uint32_t VL53L0X_calc_timeout_mclks(VL53L0X_DEV Dev,
|
||||
uint32_t timeout_period_us, uint8_t vcsel_period_pclks);
|
||||
|
||||
uint16_t VL53L0X_encode_timeout(uint32_t timeout_macro_clks);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _VL53L0X_API_CORE_H_ */
|
||||
@@ -0,0 +1,42 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
******************************************************************************/
|
||||
|
||||
#include "vl53l0x_api.h"
|
||||
#include "vl53l0x_api_core.h"
|
||||
|
||||
|
||||
#ifndef __KERNEL__
|
||||
#include <stdlib.h>
|
||||
#endif
|
||||
#define LOG_FUNCTION_START(fmt, ...) \
|
||||
_LOG_FUNCTION_START(TRACE_MODULE_API, fmt, ##__VA_ARGS__)
|
||||
#define LOG_FUNCTION_END(status, ...) \
|
||||
_LOG_FUNCTION_END(TRACE_MODULE_API, status, ##__VA_ARGS__)
|
||||
#define LOG_FUNCTION_END_FMT(status, fmt, ...) \
|
||||
_LOG_FUNCTION_END_FMT(TRACE_MODULE_API, status, fmt, ##__VA_ARGS__)
|
||||
|
||||
@@ -0,0 +1,47 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef _VL53L0X_API_RANGING_H_
|
||||
#define _VL53L0X_API_RANGING_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
#include "vl53l0x_platform.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _VL53L0X_API_RANGING_H_ */
|
||||
@@ -0,0 +1,21 @@
|
||||
#ifndef VL53L0X_API_STRINGS_H_
|
||||
#define VL53L0X_API_STRINGS_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
|
||||
#ifndef VL53L0X_API
|
||||
#define VL53L0X_API
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
VL53L0X_API VL53L0X_Error VL53L0X_GetStatusErrorString(VL53L0X_Error Status, char *pErrorString);
|
||||
VL53L0X_API VL53L0X_Error VL53L0X_GetStatusString(VL53L0X_Error Status, char *pStatusString);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,663 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
/**
|
||||
* @file VL53L0X_def.h
|
||||
*
|
||||
* @brief Type definitions for VL53L0X API.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _VL53L0X_DEF_H_
|
||||
#define _VL53L0X_DEF_H_
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @defgroup VL53L0X_globaldefine_group VL53L0X Defines
|
||||
* @brief VL53L0X Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** PAL SPECIFICATION major version */
|
||||
#define VL53L0X10_SPECIFICATION_VER_MAJOR 1
|
||||
/** PAL SPECIFICATION minor version */
|
||||
#define VL53L0X10_SPECIFICATION_VER_MINOR 2
|
||||
/** PAL SPECIFICATION sub version */
|
||||
#define VL53L0X10_SPECIFICATION_VER_SUB 7
|
||||
/** PAL SPECIFICATION sub version */
|
||||
#define VL53L0X10_SPECIFICATION_VER_REVISION 1440
|
||||
|
||||
/** VL53L0X PAL IMPLEMENTATION major version */
|
||||
#define VL53L0X10_IMPLEMENTATION_VER_MAJOR 1
|
||||
/** VL53L0X PAL IMPLEMENTATION minor version */
|
||||
#define VL53L0X10_IMPLEMENTATION_VER_MINOR 0
|
||||
/** VL53L0X PAL IMPLEMENTATION sub version */
|
||||
#define VL53L0X10_IMPLEMENTATION_VER_SUB 9
|
||||
/** VL53L0X PAL IMPLEMENTATION sub version */
|
||||
#define VL53L0X10_IMPLEMENTATION_VER_REVISION 3673
|
||||
|
||||
/** PAL SPECIFICATION major version */
|
||||
#define VL53L0X_SPECIFICATION_VER_MAJOR 1
|
||||
/** PAL SPECIFICATION minor version */
|
||||
#define VL53L0X_SPECIFICATION_VER_MINOR 2
|
||||
/** PAL SPECIFICATION sub version */
|
||||
#define VL53L0X_SPECIFICATION_VER_SUB 7
|
||||
/** PAL SPECIFICATION sub version */
|
||||
#define VL53L0X_SPECIFICATION_VER_REVISION 1440
|
||||
|
||||
/** VL53L0X PAL IMPLEMENTATION major version */
|
||||
#define VL53L0X_IMPLEMENTATION_VER_MAJOR 1
|
||||
/** VL53L0X PAL IMPLEMENTATION minor version */
|
||||
#define VL53L0X_IMPLEMENTATION_VER_MINOR 0
|
||||
/** VL53L0X PAL IMPLEMENTATION sub version */
|
||||
#define VL53L0X_IMPLEMENTATION_VER_SUB 4
|
||||
/** VL53L0X PAL IMPLEMENTATION sub version */
|
||||
#define VL53L0X_IMPLEMENTATION_VER_REVISION 4960
|
||||
#define VL53L0X_DEFAULT_MAX_LOOP 2000
|
||||
#define VL53L0X_MAX_STRING_LENGTH 32
|
||||
|
||||
|
||||
#include "vl53l0x_device.h"
|
||||
#include "vl53l0x_types.h"
|
||||
|
||||
|
||||
/****************************************
|
||||
* PRIVATE define do not edit
|
||||
****************************************/
|
||||
|
||||
/** @brief Defines the parameters of the Get Version Functions
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t revision; /*!< revision number */
|
||||
uint8_t major; /*!< major number */
|
||||
uint8_t minor; /*!< minor number */
|
||||
uint8_t build; /*!< build number */
|
||||
} VL53L0X_Version_t;
|
||||
|
||||
|
||||
/** @brief Defines the parameters of the Get Device Info Functions
|
||||
*/
|
||||
typedef struct {
|
||||
char Name[VL53L0X_MAX_STRING_LENGTH];
|
||||
/*!< Name of the Device e.g. Left_Distance */
|
||||
char Type[VL53L0X_MAX_STRING_LENGTH];
|
||||
/*!< Type of the Device e.g VL53L0X */
|
||||
char ProductId[VL53L0X_MAX_STRING_LENGTH];
|
||||
/*!< Product Identifier String */
|
||||
uint8_t ProductType;
|
||||
/*!< Product Type, VL53L0X = 1, VL53L1 = 2 */
|
||||
uint8_t ProductRevisionMajor;
|
||||
/*!< Product revision major */
|
||||
uint8_t ProductRevisionMinor;
|
||||
/*!< Product revision minor */
|
||||
} VL53L0X_DeviceInfo_t;
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_Error_group Error and Warning code returned by API
|
||||
* The following DEFINE are used to identify the PAL ERROR
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef int8_t VL53L0X_Error;
|
||||
|
||||
#define VL53L0X_ERROR_NONE ((VL53L0X_Error) 0)
|
||||
#define VL53L0X_ERROR_CALIBRATION_WARNING ((VL53L0X_Error) - 1)
|
||||
/*!< Warning invalid calibration data may be in used
|
||||
* \a VL53L0X_InitData()
|
||||
* \a VL53L0X_GetOffsetCalibrationData
|
||||
* \a VL53L0X_SetOffsetCalibrationData
|
||||
*/
|
||||
#define VL53L0X_ERROR_MIN_CLIPPED ((VL53L0X_Error) - 2)
|
||||
/*!< Warning parameter passed was clipped to min before to be applied */
|
||||
|
||||
#define VL53L0X_ERROR_UNDEFINED ((VL53L0X_Error) - 3)
|
||||
/*!< Unqualified error */
|
||||
#define VL53L0X_ERROR_INVALID_PARAMS ((VL53L0X_Error) - 4)
|
||||
/*!< Parameter passed is invalid or out of range */
|
||||
#define VL53L0X_ERROR_NOT_SUPPORTED ((VL53L0X_Error) - 5)
|
||||
/*!< Function is not supported in current mode or configuration */
|
||||
#define VL53L0X_ERROR_RANGE_ERROR ((VL53L0X_Error) - 6)
|
||||
/*!< Device report a ranging error interrupt status */
|
||||
#define VL53L0X_ERROR_TIME_OUT ((VL53L0X_Error) - 7)
|
||||
/*!< Aborted due to time out */
|
||||
#define VL53L0X_ERROR_MODE_NOT_SUPPORTED ((VL53L0X_Error) - 8)
|
||||
/*!< Asked mode is not supported by the device */
|
||||
#define VL53L0X_ERROR_BUFFER_TOO_SMALL ((VL53L0X_Error) - 9)
|
||||
/*!< ... */
|
||||
#define VL53L0X_ERROR_GPIO_NOT_EXISTING ((VL53L0X_Error) - 10)
|
||||
/*!< User tried to setup a non-existing GPIO pin */
|
||||
#define VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED ((VL53L0X_Error) - 11)
|
||||
/*!< unsupported GPIO functionality */
|
||||
#define VL53L0X_ERROR_INTERRUPT_NOT_CLEARED ((VL53L0X_Error) - 12)
|
||||
/*!< Error during interrupt clear */
|
||||
#define VL53L0X_ERROR_CONTROL_INTERFACE ((VL53L0X_Error) - 20)
|
||||
/*!< error reported from IO functions */
|
||||
#define VL53L0X_ERROR_INVALID_COMMAND ((VL53L0X_Error) - 30)
|
||||
/*!< The command is not allowed in the current device state
|
||||
* (power down)
|
||||
*/
|
||||
#define VL53L0X_ERROR_DIVISION_BY_ZERO ((VL53L0X_Error) - 40)
|
||||
/*!< In the function a division by zero occurs */
|
||||
#define VL53L0X_ERROR_REF_SPAD_INIT ((VL53L0X_Error) - 50)
|
||||
/*!< Error during reference SPAD initialization */
|
||||
#define VL53L0X_ERROR_NOT_IMPLEMENTED ((VL53L0X_Error) - 99)
|
||||
/*!< Tells requested functionality has not been implemented yet or
|
||||
* not compatible with the device
|
||||
*/
|
||||
/** @} VL53L0X_define_Error_group */
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_DeviceModes_group Defines Device modes
|
||||
* Defines all possible modes for the device
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_DeviceModes;
|
||||
|
||||
#define VL53L0X_DEVICEMODE_SINGLE_RANGING ((VL53L0X_DeviceModes) 0)
|
||||
#define VL53L0X_DEVICEMODE_CONTINUOUS_RANGING ((VL53L0X_DeviceModes) 1)
|
||||
#define VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM ((VL53L0X_DeviceModes) 2)
|
||||
#define VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING ((VL53L0X_DeviceModes) 3)
|
||||
#define VL53L0X_DEVICEMODE_SINGLE_ALS ((VL53L0X_DeviceModes) 10)
|
||||
#define VL53L0X_DEVICEMODE_GPIO_DRIVE ((VL53L0X_DeviceModes) 20)
|
||||
#define VL53L0X_DEVICEMODE_GPIO_OSC ((VL53L0X_DeviceModes) 21)
|
||||
/* ... Modes to be added depending on device */
|
||||
/** @} VL53L0X_define_DeviceModes_group */
|
||||
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_HistogramModes_group Defines Histogram modes
|
||||
* Defines all possible Histogram modes for the device
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_HistogramModes;
|
||||
|
||||
#define VL53L0X_HISTOGRAMMODE_DISABLED ((VL53L0X_HistogramModes) 0)
|
||||
/*!< Histogram Disabled */
|
||||
#define VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY ((VL53L0X_HistogramModes) 1)
|
||||
/*!< Histogram Reference array only */
|
||||
#define VL53L0X_HISTOGRAMMODE_RETURN_ONLY ((VL53L0X_HistogramModes) 2)
|
||||
/*!< Histogram Return array only */
|
||||
#define VL53L0X_HISTOGRAMMODE_BOTH ((VL53L0X_HistogramModes) 3)
|
||||
/*!< Histogram both Reference and Return Arrays */
|
||||
/* ... Modes to be added depending on device */
|
||||
/** @} VL53L0X_define_HistogramModes_group */
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_PowerModes_group List of available Power Modes
|
||||
* List of available Power Modes
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef uint8_t VL53L0X_PowerModes;
|
||||
|
||||
#define VL53L0X_POWERMODE_STANDBY_LEVEL1 ((VL53L0X_PowerModes) 0)
|
||||
/*!< Standby level 1 */
|
||||
#define VL53L0X_POWERMODE_STANDBY_LEVEL2 ((VL53L0X_PowerModes) 1)
|
||||
/*!< Standby level 2 */
|
||||
#define VL53L0X_POWERMODE_IDLE_LEVEL1 ((VL53L0X_PowerModes) 2)
|
||||
/*!< Idle level 1 */
|
||||
#define VL53L0X_POWERMODE_IDLE_LEVEL2 ((VL53L0X_PowerModes) 3)
|
||||
/*!< Idle level 2 */
|
||||
|
||||
/** @} VL53L0X_define_PowerModes_group */
|
||||
|
||||
|
||||
#define VL53L0X_DMAX_LUT_SIZE 7
|
||||
/*!< Defines the number of items in the DMAX lookup table */
|
||||
|
||||
/** @brief Structure defining data pair that makes up the DMAX Lookup table.
|
||||
*/
|
||||
typedef struct {
|
||||
FixPoint1616_t ambRate_mcps[VL53L0X_DMAX_LUT_SIZE];
|
||||
/*!< Ambient rate (mcps) */
|
||||
FixPoint1616_t dmax_mm[VL53L0X_DMAX_LUT_SIZE];
|
||||
/*!< DMAX Value (mm) */
|
||||
} VL53L0X_DMaxLUT_t;
|
||||
|
||||
/** @brief Defines all parameters for the device
|
||||
*/
|
||||
typedef struct {
|
||||
VL53L0X_DeviceModes DeviceMode;
|
||||
/*!< Defines type of measurement to be done for the next measure */
|
||||
VL53L0X_HistogramModes HistogramMode;
|
||||
/*!< Defines type of histogram measurement to be done for the next
|
||||
* measure
|
||||
*/
|
||||
uint32_t MeasurementTimingBudgetMicroSeconds;
|
||||
/*!< Defines the allowed total time for a single measurement */
|
||||
uint32_t InterMeasurementPeriodMilliSeconds;
|
||||
/*!< Defines time between two consecutive measurements (between two
|
||||
* measurement starts). If set to 0 means back-to-back mode
|
||||
*/
|
||||
uint8_t XTalkCompensationEnable;
|
||||
/*!< Tells if Crosstalk compensation shall be enable or not */
|
||||
uint16_t XTalkCompensationRangeMilliMeter;
|
||||
/*!< CrossTalk compensation range in millimeter */
|
||||
FixPoint1616_t XTalkCompensationRateMegaCps;
|
||||
/*!< CrossTalk compensation rate in Mega counts per seconds.
|
||||
* Expressed in 16.16 fixed point format.
|
||||
*/
|
||||
int32_t RangeOffsetMicroMeters;
|
||||
/*!< Range offset adjustment (mm). */
|
||||
|
||||
uint8_t LimitChecksEnable[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
|
||||
/*!< This Array store all the Limit Check enable for this device. */
|
||||
uint8_t LimitChecksStatus[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
|
||||
/*!< This Array store all the Status of the check linked to last
|
||||
* measurement.
|
||||
*/
|
||||
FixPoint1616_t LimitChecksValue[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
|
||||
/*!< This Array store all the Limit Check value for this device */
|
||||
|
||||
VL53L0X_DMaxLUT_t dmax_lut;
|
||||
/*!< Lookup table defining ambient rates and associated
|
||||
* dmax values.
|
||||
*/
|
||||
|
||||
uint8_t WrapAroundCheckEnable;
|
||||
/*!< Tells if Wrap Around Check shall be enable or not */
|
||||
} VL53L0X_DeviceParameters_t;
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_State_group Defines the current status
|
||||
* of the device
|
||||
* Defines the current status of the device
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef uint8_t VL53L0X_State;
|
||||
|
||||
#define VL53L0X_STATE_POWERDOWN ((VL53L0X_State) 0)
|
||||
/*!< Device is in HW reset */
|
||||
#define VL53L0X_STATE_WAIT_STATICINIT ((VL53L0X_State) 1)
|
||||
/*!< Device is initialized and wait for static initialization */
|
||||
#define VL53L0X_STATE_STANDBY ((VL53L0X_State) 2)
|
||||
/*!< Device is in Low power Standby mode */
|
||||
#define VL53L0X_STATE_IDLE ((VL53L0X_State) 3)
|
||||
/*!< Device has been initialized and ready to do measurements */
|
||||
#define VL53L0X_STATE_RUNNING ((VL53L0X_State) 4)
|
||||
/*!< Device is performing measurement */
|
||||
#define VL53L0X_STATE_UNKNOWN ((VL53L0X_State) 98)
|
||||
/*!< Device is in unknown state and need to be rebooted */
|
||||
#define VL53L0X_STATE_ERROR ((VL53L0X_State) 99)
|
||||
/*!< Device is in error state and need to be rebooted */
|
||||
|
||||
/** @} VL53L0X_define_State_group */
|
||||
|
||||
|
||||
/**
|
||||
* @struct VL53L0X_RangeData_t
|
||||
* @brief Range measurement data.
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t TimeStamp; /*!< 32-bit time stamp. */
|
||||
uint32_t MeasurementTimeUsec;
|
||||
/*!< Give the Measurement time needed by the device to do the
|
||||
* measurement.
|
||||
*/
|
||||
|
||||
|
||||
uint16_t RangeMilliMeter; /*!< range distance in millimeter. */
|
||||
|
||||
uint16_t RangeDMaxMilliMeter;
|
||||
/*!< Tells what is the maximum detection distance of the device
|
||||
* in current setup and environment conditions (Filled when
|
||||
* applicable)
|
||||
*/
|
||||
|
||||
FixPoint1616_t SignalRateRtnMegaCps;
|
||||
/*!< Return signal rate (MCPS)\n these is a 16.16 fix point
|
||||
* value, which is effectively a measure of target
|
||||
* reflectance.
|
||||
*/
|
||||
FixPoint1616_t AmbientRateRtnMegaCps;
|
||||
/*!< Return ambient rate (MCPS)\n these is a 16.16 fix point
|
||||
* value, which is effectively a measure of the ambien
|
||||
* t light.
|
||||
*/
|
||||
|
||||
uint16_t EffectiveSpadRtnCount;
|
||||
/*!< Return the effective SPAD count for the return signal.
|
||||
* To obtain Real value it should be divided by 256
|
||||
*/
|
||||
|
||||
uint8_t ZoneId;
|
||||
/*!< Denotes which zone and range scheduler stage the range
|
||||
* data relates to.
|
||||
*/
|
||||
uint8_t RangeFractionalPart;
|
||||
/*!< Fractional part of range distance. Final value is a
|
||||
* FixPoint168 value.
|
||||
*/
|
||||
uint8_t RangeStatus;
|
||||
/*!< Range Status for the current measurement. This is device
|
||||
* dependent. Value = 0 means value is valid.
|
||||
* See \ref RangeStatusPage
|
||||
*/
|
||||
} VL53L0X_RangingMeasurementData_t;
|
||||
|
||||
|
||||
#define VL53L0X_HISTOGRAM_BUFFER_SIZE 24
|
||||
|
||||
/**
|
||||
* @struct VL53L0X_HistogramData_t
|
||||
* @brief Histogram measurement data.
|
||||
*/
|
||||
typedef struct {
|
||||
/* Histogram Measurement data */
|
||||
uint32_t HistogramData[VL53L0X_HISTOGRAM_BUFFER_SIZE];
|
||||
/*!< Histogram data */
|
||||
/*!< Indicate the types of histogram data :
|
||||
*Return only, Reference only, both Return and Reference
|
||||
*/
|
||||
uint8_t FirstBin; /*!< First Bin value */
|
||||
uint8_t BufferSize; /*!< Buffer Size - Set by the user.*/
|
||||
uint8_t NumberOfBins;
|
||||
/*!< Number of bins filled by the histogram measurement */
|
||||
|
||||
VL53L0X_DeviceError ErrorStatus;
|
||||
/*!< Error status of the current measurement. \n
|
||||
* see @a ::VL53L0X_DeviceError @a VL53L0X_GetStatusErrorString()
|
||||
*/
|
||||
} VL53L0X_HistogramMeasurementData_t;
|
||||
|
||||
#define VL53L0X_REF_SPAD_BUFFER_SIZE 6
|
||||
|
||||
/**
|
||||
* @struct VL53L0X_SpadData_t
|
||||
* @brief Spad Configuration Data.
|
||||
*/
|
||||
typedef struct {
|
||||
uint8_t RefSpadEnables[VL53L0X_REF_SPAD_BUFFER_SIZE];
|
||||
/*!< Reference Spad Enables */
|
||||
uint8_t RefGoodSpadMap[VL53L0X_REF_SPAD_BUFFER_SIZE];
|
||||
/*!< Reference Spad Good Spad Map */
|
||||
} VL53L0X_SpadData_t;
|
||||
|
||||
typedef struct {
|
||||
FixPoint1616_t OscFrequencyMHz; /* Frequency used */
|
||||
|
||||
uint16_t LastEncodedTimeout;
|
||||
/* last encoded Time out used for timing budget*/
|
||||
|
||||
VL53L0X_GpioFunctionality Pin0GpioFunctionality;
|
||||
/* store the functionality of the GPIO: pin0 */
|
||||
|
||||
uint32_t FinalRangeTimeoutMicroSecs;
|
||||
/*!< Execution time of the final range*/
|
||||
uint8_t FinalRangeVcselPulsePeriod;
|
||||
/*!< Vcsel pulse period (pll clocks) for the final range measurement*/
|
||||
uint32_t PreRangeTimeoutMicroSecs;
|
||||
/*!< Execution time of the final range*/
|
||||
uint8_t PreRangeVcselPulsePeriod;
|
||||
/*!< Vcsel pulse period (pll clocks) for the pre-range measurement*/
|
||||
|
||||
uint16_t SigmaEstRefArray;
|
||||
/*!< Reference array sigma value in 1/100th of [mm] e.g. 100 = 1mm */
|
||||
uint16_t SigmaEstEffPulseWidth;
|
||||
/*!< Effective Pulse width for sigma estimate in 1/100th
|
||||
* of ns e.g. 900 = 9.0ns
|
||||
*/
|
||||
uint16_t SigmaEstEffAmbWidth;
|
||||
/*!< Effective Ambient width for sigma estimate in 1/100th of ns
|
||||
* e.g. 500 = 5.0ns
|
||||
*/
|
||||
|
||||
|
||||
/* Indicate if read from device has been done (==1) or not (==0) */
|
||||
uint8_t ReadDataFromDeviceDone;
|
||||
uint8_t ModuleId; /* Module ID */
|
||||
uint8_t Revision; /* test Revision */
|
||||
char ProductId[VL53L0X_MAX_STRING_LENGTH];
|
||||
/* Product Identifier String */
|
||||
uint8_t ReferenceSpadCount; /* used for ref spad management */
|
||||
uint8_t ReferenceSpadType; /* used for ref spad management */
|
||||
uint8_t RefSpadsInitialised; /* reports if ref spads are initialised. */
|
||||
uint32_t PartUIDUpper; /*!< Unique Part ID Upper */
|
||||
uint32_t PartUIDLower; /*!< Unique Part ID Lower */
|
||||
/*!< Peek Signal rate at 400 mm*/
|
||||
FixPoint1616_t SignalRateMeasFixed400mm;
|
||||
|
||||
} VL53L0X_DeviceSpecificParameters_t;
|
||||
|
||||
/**
|
||||
* @struct VL53L0X_DevData_t
|
||||
*
|
||||
* @brief VL53L0X PAL device ST private data structure \n
|
||||
* End user should never access any of these field directly
|
||||
*
|
||||
* These must never access directly but only via macro
|
||||
*/
|
||||
typedef struct {
|
||||
int32_t Part2PartOffsetNVMMicroMeter;
|
||||
/*!< backed up NVM value */
|
||||
int32_t Part2PartOffsetAdjustmentNVMMicroMeter;
|
||||
/*!< backed up NVM value representing additional offset adjustment */
|
||||
VL53L0X_DeviceParameters_t CurrentParameters;
|
||||
/*!< Current Device Parameter */
|
||||
VL53L0X_RangingMeasurementData_t LastRangeMeasure;
|
||||
/*!< Ranging Data */
|
||||
VL53L0X_HistogramMeasurementData_t LastHistogramMeasure;
|
||||
/*!< Histogram Data */
|
||||
VL53L0X_DeviceSpecificParameters_t DeviceSpecificParameters;
|
||||
/*!< Parameters specific to the device */
|
||||
VL53L0X_SpadData_t SpadData;
|
||||
/*!< Spad Data */
|
||||
uint8_t SequenceConfig;
|
||||
/*!< Internal value for the sequence config */
|
||||
uint8_t RangeFractionalEnable;
|
||||
/*!< Enable/Disable fractional part of ranging data */
|
||||
VL53L0X_State PalState;
|
||||
/*!< Current state of the PAL for this device */
|
||||
VL53L0X_PowerModes PowerMode;
|
||||
/*!< Current Power Mode */
|
||||
uint16_t SigmaEstRefArray;
|
||||
/*!< Reference array sigma value in 1/100th of [mm] e.g. 100 = 1mm */
|
||||
uint16_t SigmaEstEffPulseWidth;
|
||||
/*!< Effective Pulse width for sigma estimate in 1/100th
|
||||
* of ns e.g. 900 = 9.0ns
|
||||
*/
|
||||
uint16_t SigmaEstEffAmbWidth;
|
||||
/*!< Effective Ambient width for sigma estimate in 1/100th of ns
|
||||
* e.g. 500 = 5.0ns
|
||||
*/
|
||||
uint8_t StopVariable;
|
||||
/*!< StopVariable used during the stop sequence */
|
||||
uint16_t targetRefRate;
|
||||
/*!< Target Ambient Rate for Ref spad management */
|
||||
FixPoint1616_t SigmaEstimate;
|
||||
/*!< Sigma Estimate - based on ambient & VCSEL rates and
|
||||
* signal_total_events
|
||||
*/
|
||||
FixPoint1616_t SignalEstimate;
|
||||
/*!< Signal Estimate - based on ambient & VCSEL rates and cross talk */
|
||||
FixPoint1616_t LastSignalRefMcps;
|
||||
/*!< Latest Signal ref in Mcps */
|
||||
uint8_t *pTuningSettingsPointer;
|
||||
/*!< Pointer for Tuning Settings table */
|
||||
uint8_t UseInternalTuningSettings;
|
||||
/*!< Indicate if we use Tuning Settings table */
|
||||
uint16_t LinearityCorrectiveGain;
|
||||
/*!< Linearity Corrective Gain value in x1000 */
|
||||
} VL53L0X_DevData_t;
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_InterruptPolarity_group Defines the Polarity
|
||||
* of the Interrupt
|
||||
* Defines the Polarity of the Interrupt
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_InterruptPolarity;
|
||||
|
||||
#define VL53L0X_INTERRUPTPOLARITY_LOW ((VL53L0X_InterruptPolarity) 0)
|
||||
/*!< Set active low polarity best setup for falling edge. */
|
||||
#define VL53L0X_INTERRUPTPOLARITY_HIGH ((VL53L0X_InterruptPolarity) 1)
|
||||
/*!< Set active high polarity best setup for rising edge. */
|
||||
|
||||
/** @} VL53L0X_define_InterruptPolarity_group */
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_define_VcselPeriod_group Vcsel Period Defines
|
||||
* Defines the range measurement for which to access the vcsel period.
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_VcselPeriod;
|
||||
|
||||
#define VL53L0X_VCSEL_PERIOD_PRE_RANGE ((VL53L0X_VcselPeriod) 0)
|
||||
/*!<Identifies the pre-range vcsel period. */
|
||||
#define VL53L0X_VCSEL_PERIOD_FINAL_RANGE ((VL53L0X_VcselPeriod) 1)
|
||||
/*!<Identifies the final range vcsel period. */
|
||||
|
||||
/** @} VL53L0X_define_VcselPeriod_group */
|
||||
|
||||
/** @defgroup VL53L0X_define_SchedulerSequence_group Defines the steps
|
||||
* carried out by the scheduler during a range measurement.
|
||||
* @{
|
||||
* Defines the states of all the steps in the scheduler
|
||||
* i.e. enabled/disabled.
|
||||
*/
|
||||
typedef struct {
|
||||
uint8_t TccOn; /*!<Reports if Target Centre Check On */
|
||||
uint8_t MsrcOn; /*!<Reports if MSRC On */
|
||||
uint8_t DssOn; /*!<Reports if DSS On */
|
||||
uint8_t PreRangeOn; /*!<Reports if Pre-Range On */
|
||||
uint8_t FinalRangeOn; /*!<Reports if Final-Range On */
|
||||
} VL53L0X_SchedulerSequenceSteps_t;
|
||||
|
||||
/** @} VL53L0X_define_SchedulerSequence_group */
|
||||
|
||||
/** @defgroup VL53L0X_define_SequenceStepId_group Defines the Polarity
|
||||
* of the Interrupt
|
||||
* Defines the the sequence steps performed during ranging..
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_SequenceStepId;
|
||||
|
||||
#define VL53L0X_SEQUENCESTEP_TCC ((VL53L0X_VcselPeriod) 0)
|
||||
/*!<Target CentreCheck identifier. */
|
||||
#define VL53L0X_SEQUENCESTEP_DSS ((VL53L0X_VcselPeriod) 1)
|
||||
/*!<Dynamic Spad Selection function Identifier. */
|
||||
#define VL53L0X_SEQUENCESTEP_MSRC ((VL53L0X_VcselPeriod) 2)
|
||||
/*!<Minimum Signal Rate Check function Identifier. */
|
||||
#define VL53L0X_SEQUENCESTEP_PRE_RANGE ((VL53L0X_VcselPeriod) 3)
|
||||
/*!<Pre-Range check Identifier. */
|
||||
#define VL53L0X_SEQUENCESTEP_FINAL_RANGE ((VL53L0X_VcselPeriod) 4)
|
||||
/*!<Final Range Check Identifier. */
|
||||
|
||||
#define VL53L0X_SEQUENCESTEP_NUMBER_OF_CHECKS 5
|
||||
/*!<Number of Sequence Step Managed by the API. */
|
||||
|
||||
/** @} VL53L0X_define_SequenceStepId_group */
|
||||
|
||||
|
||||
/* MACRO Definitions */
|
||||
/** @defgroup VL53L0X_define_GeneralMacro_group General Macro Defines
|
||||
* General Macro Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Defines */
|
||||
#define VL53L0X_SETPARAMETERFIELD(Dev, field, value) \
|
||||
PALDevDataSet(Dev, CurrentParameters.field, value)
|
||||
|
||||
#define VL53L0X_GETPARAMETERFIELD(Dev, field, variable) \
|
||||
(variable = ((PALDevDataGet(Dev, CurrentParameters)).field))
|
||||
|
||||
|
||||
#define VL53L0X_SETARRAYPARAMETERFIELD(Dev, field, index, value) \
|
||||
PALDevDataSet(Dev, CurrentParameters.field[index], value)
|
||||
|
||||
#define VL53L0X_GETARRAYPARAMETERFIELD(Dev, field, index, variable) \
|
||||
(variable = (PALDevDataGet(Dev, CurrentParameters)).field[index])
|
||||
|
||||
#define VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, field, value) \
|
||||
PALDevDataSet(Dev, DeviceSpecificParameters.field, value)
|
||||
|
||||
#define VL53L0X_GETDEVICESPECIFICPARAMETER(Dev, field) \
|
||||
PALDevDataGet(Dev, DeviceSpecificParameters).field
|
||||
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT97(Value) \
|
||||
(uint16_t)((Value>>9)&0xFFFF)
|
||||
#define VL53L0X_FIXPOINT97TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<9)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT88(Value) \
|
||||
(uint16_t)((Value>>8)&0xFFFF)
|
||||
#define VL53L0X_FIXPOINT88TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<8)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT412(Value) \
|
||||
(uint16_t)((Value>>4)&0xFFFF)
|
||||
#define VL53L0X_FIXPOINT412TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<4)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT313(Value) \
|
||||
(uint16_t)((Value>>3)&0xFFFF)
|
||||
#define VL53L0X_FIXPOINT313TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<3)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT08(Value) \
|
||||
(uint8_t)((Value>>8)&0x00FF)
|
||||
#define VL53L0X_FIXPOINT08TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<8)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT53(Value) \
|
||||
(uint8_t)((Value>>13)&0x00FF)
|
||||
#define VL53L0X_FIXPOINT53TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<13)
|
||||
|
||||
#define VL53L0X_FIXPOINT1616TOFIXPOINT102(Value) \
|
||||
(uint16_t)((Value>>14)&0x0FFF)
|
||||
#define VL53L0X_FIXPOINT102TOFIXPOINT1616(Value) \
|
||||
(FixPoint1616_t)(Value<<12)
|
||||
|
||||
#define VL53L0X_MAKEUINT16(lsb, msb) (uint16_t)((((uint16_t)msb)<<8) + \
|
||||
(uint16_t)lsb)
|
||||
|
||||
/** @} VL53L0X_define_GeneralMacro_group */
|
||||
|
||||
/** @} VL53L0X_globaldefine_group */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* _VL53L0X_DEF_H_ */
|
||||
@@ -0,0 +1,262 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
/**
|
||||
* Device specific defines. To be adapted by implementer for the targeted
|
||||
* device.
|
||||
*/
|
||||
|
||||
#ifndef _VL53L0X_DEVICE_H_
|
||||
#define _VL53L0X_DEVICE_H_
|
||||
|
||||
#include "vl53l0x_types.h"
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_DevSpecDefines_group VL53L0X cut1.1 Device
|
||||
* Specific Defines
|
||||
* @brief VL53L0X cut1.1 Device Specific Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_DeviceError_group Device Error
|
||||
* @brief Device Error code
|
||||
*
|
||||
* This enum is Device specific it should be updated in the implementation
|
||||
* Use @a VL53L0X_GetStatusErrorString() to get the string.
|
||||
* It is related to Status Register of the Device.
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_DeviceError;
|
||||
|
||||
#define VL53L0X_DEVICEERROR_NONE ((VL53L0X_DeviceError) 0)
|
||||
/*!< 0 NoError */
|
||||
#define VL53L0X_DEVICEERROR_VCSELCONTINUITYTESTFAILURE ((VL53L0X_DeviceError) 1)
|
||||
#define VL53L0X_DEVICEERROR_VCSELWATCHDOGTESTFAILURE ((VL53L0X_DeviceError) 2)
|
||||
#define VL53L0X_DEVICEERROR_NOVHVVALUEFOUND ((VL53L0X_DeviceError) 3)
|
||||
#define VL53L0X_DEVICEERROR_MSRCNOTARGET ((VL53L0X_DeviceError) 4)
|
||||
#define VL53L0X_DEVICEERROR_SNRCHECK ((VL53L0X_DeviceError) 5)
|
||||
#define VL53L0X_DEVICEERROR_RANGEPHASECHECK ((VL53L0X_DeviceError) 6)
|
||||
#define VL53L0X_DEVICEERROR_SIGMATHRESHOLDCHECK ((VL53L0X_DeviceError) 7)
|
||||
#define VL53L0X_DEVICEERROR_TCC ((VL53L0X_DeviceError) 8)
|
||||
#define VL53L0X_DEVICEERROR_PHASECONSISTENCY ((VL53L0X_DeviceError) 9)
|
||||
#define VL53L0X_DEVICEERROR_MINCLIP ((VL53L0X_DeviceError) 10)
|
||||
#define VL53L0X_DEVICEERROR_RANGECOMPLETE ((VL53L0X_DeviceError) 11)
|
||||
#define VL53L0X_DEVICEERROR_ALGOUNDERFLOW ((VL53L0X_DeviceError) 12)
|
||||
#define VL53L0X_DEVICEERROR_ALGOOVERFLOW ((VL53L0X_DeviceError) 13)
|
||||
#define VL53L0X_DEVICEERROR_RANGEIGNORETHRESHOLD ((VL53L0X_DeviceError) 14)
|
||||
|
||||
/** @} end of VL53L0X_DeviceError_group */
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_CheckEnable_group Check Enable list
|
||||
* @brief Check Enable code
|
||||
*
|
||||
* Define used to specify the LimitCheckId.
|
||||
* Use @a VL53L0X_GetLimitCheckInfo() to get the string.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE 0
|
||||
#define VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE 1
|
||||
#define VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP 2
|
||||
#define VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD 3
|
||||
#define VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC 4
|
||||
#define VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE 5
|
||||
|
||||
#define VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS 6
|
||||
|
||||
/** @} end of VL53L0X_CheckEnable_group */
|
||||
|
||||
|
||||
/** @defgroup VL53L0X_GpioFunctionality_group Gpio Functionality
|
||||
* @brief Defines the different functionalities for the device GPIO(s)
|
||||
* @{
|
||||
*/
|
||||
typedef uint8_t VL53L0X_GpioFunctionality;
|
||||
|
||||
#define VL53L0X_GPIOFUNCTIONALITY_OFF \
|
||||
((VL53L0X_GpioFunctionality) 0) /*!< NO Interrupt */
|
||||
#define VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW \
|
||||
((VL53L0X_GpioFunctionality) 1) /*!< Level Low (value < thresh_low) */
|
||||
#define VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH \
|
||||
((VL53L0X_GpioFunctionality) 2) /*!< Level High (value>thresh_high) */
|
||||
#define VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT \
|
||||
((VL53L0X_GpioFunctionality) 3)
|
||||
/*!< Out Of Window (value < thresh_low OR value > thresh_high) */
|
||||
#define VL53L0X_GPIOFUNCTIONALITY_NEW_MEASURE_READY \
|
||||
((VL53L0X_GpioFunctionality) 4) /*!< New Sample Ready */
|
||||
|
||||
/** @} end of VL53L0X_GpioFunctionality_group */
|
||||
|
||||
|
||||
/* Device register map */
|
||||
|
||||
/** @defgroup VL53L0X_DefineRegisters_group Define Registers
|
||||
* @brief List of all the defined registers
|
||||
* @{
|
||||
*/
|
||||
#define VL53L0X_REG_SYSRANGE_START 0x000
|
||||
/** mask existing bit in #VL53L0X_REG_SYSRANGE_START*/
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_MASK 0x0F
|
||||
/** bit 0 in #VL53L0X_REG_SYSRANGE_START write 1 toggle state in
|
||||
* continuous mode and arm next shot in single shot mode
|
||||
*/
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_START_STOP 0x01
|
||||
/** bit 1 write 0 in #VL53L0X_REG_SYSRANGE_START set single shot mode */
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_SINGLESHOT 0x00
|
||||
/** bit 1 write 1 in #VL53L0X_REG_SYSRANGE_START set back-to-back
|
||||
* operation mode
|
||||
*/
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_BACKTOBACK 0x02
|
||||
/** bit 2 write 1 in #VL53L0X_REG_SYSRANGE_START set timed operation
|
||||
* mode
|
||||
*/
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_TIMED 0x04
|
||||
/** bit 3 write 1 in #VL53L0X_REG_SYSRANGE_START set histogram operation
|
||||
* mode
|
||||
*/
|
||||
#define VL53L0X_REG_SYSRANGE_MODE_HISTOGRAM 0x08
|
||||
|
||||
|
||||
#define VL53L0X_REG_SYSTEM_THRESH_HIGH 0x000C
|
||||
#define VL53L0X_REG_SYSTEM_THRESH_LOW 0x000E
|
||||
|
||||
|
||||
#define VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG 0x0001
|
||||
#define VL53L0X_REG_SYSTEM_RANGE_CONFIG 0x0009
|
||||
#define VL53L0X_REG_SYSTEM_INTERMEASUREMENT_PERIOD 0x0004
|
||||
|
||||
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_CONFIG_GPIO 0x000A
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_DISABLED 0x00
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_LEVEL_LOW 0x01
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_LEVEL_HIGH 0x02
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_OUT_OF_WINDOW 0x03
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY 0x04
|
||||
|
||||
#define VL53L0X_REG_GPIO_HV_MUX_ACTIVE_HIGH 0x0084
|
||||
|
||||
|
||||
#define VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR 0x000B
|
||||
|
||||
/* Result registers */
|
||||
#define VL53L0X_REG_RESULT_INTERRUPT_STATUS 0x0013
|
||||
#define VL53L0X_REG_RESULT_RANGE_STATUS 0x0014
|
||||
|
||||
#define VL53L0X_REG_RESULT_CORE_PAGE 1
|
||||
#define VL53L0X_REG_RESULT_CORE_AMBIENT_WINDOW_EVENTS_RTN 0x00BC
|
||||
#define VL53L0X_REG_RESULT_CORE_RANGING_TOTAL_EVENTS_RTN 0x00C0
|
||||
#define VL53L0X_REG_RESULT_CORE_AMBIENT_WINDOW_EVENTS_REF 0x00D0
|
||||
#define VL53L0X_REG_RESULT_CORE_RANGING_TOTAL_EVENTS_REF 0x00D4
|
||||
#define VL53L0X_REG_RESULT_PEAK_SIGNAL_RATE_REF 0x00B6
|
||||
|
||||
/* Algo register */
|
||||
|
||||
#define VL53L0X_REG_ALGO_PART_TO_PART_RANGE_OFFSET_MM 0x0028
|
||||
|
||||
#define VL53L0X_REG_I2C_SLAVE_DEVICE_ADDRESS 0x008a
|
||||
|
||||
/* Check Limit registers */
|
||||
#define VL53L0X_REG_MSRC_CONFIG_CONTROL 0x0060
|
||||
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_MIN_SNR 0X0027
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW 0x0056
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH 0x0057
|
||||
#define VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT 0x0064
|
||||
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_SNR 0X0067
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW 0x0047
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH 0x0048
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT 0x0044
|
||||
|
||||
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_SIGMA_THRESH_HI 0X0061
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_SIGMA_THRESH_LO 0X0062
|
||||
|
||||
/* PRE RANGE registers */
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_VCSEL_PERIOD 0x0050
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI 0x0051
|
||||
#define VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_LO 0x0052
|
||||
|
||||
#define VL53L0X_REG_SYSTEM_HISTOGRAM_BIN 0x0081
|
||||
#define VL53L0X_REG_HISTOGRAM_CONFIG_INITIAL_PHASE_SELECT 0x0033
|
||||
#define VL53L0X_REG_HISTOGRAM_CONFIG_READOUT_CTRL 0x0055
|
||||
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_VCSEL_PERIOD 0x0070
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_TIMEOUT_MACROP_HI 0x0071
|
||||
#define VL53L0X_REG_FINAL_RANGE_CONFIG_TIMEOUT_MACROP_LO 0x0072
|
||||
#define VL53L0X_REG_CROSSTALK_COMPENSATION_PEAK_RATE_MCPS 0x0020
|
||||
|
||||
#define VL53L0X_REG_MSRC_CONFIG_TIMEOUT_MACROP 0x0046
|
||||
|
||||
|
||||
#define VL53L0X_REG_SOFT_RESET_GO2_SOFT_RESET_N 0x00bf
|
||||
#define VL53L0X_REG_IDENTIFICATION_MODEL_ID 0x00c0
|
||||
#define VL53L0X_REG_IDENTIFICATION_REVISION_ID 0x00c2
|
||||
|
||||
#define VL53L0X_REG_OSC_CALIBRATE_VAL 0x00f8
|
||||
|
||||
|
||||
#define VL53L0X_SIGMA_ESTIMATE_MAX_VALUE 65535
|
||||
/* equivalent to a range sigma of 655.35mm */
|
||||
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH 0x032
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0 0x0B0
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_1 0x0B1
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_2 0x0B2
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_3 0x0B3
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_4 0x0B4
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_5 0x0B5
|
||||
|
||||
#define VL53L0X_REG_GLOBAL_CONFIG_REF_EN_START_SELECT 0xB6
|
||||
#define VL53L0X_REG_DYNAMIC_SPAD_NUM_REQUESTED_REF_SPAD 0x4E /* 0x14E */
|
||||
#define VL53L0X_REG_DYNAMIC_SPAD_REF_EN_START_OFFSET 0x4F /* 0x14F */
|
||||
#define VL53L0X_REG_POWER_MANAGEMENT_GO1_POWER_FORCE 0x80
|
||||
|
||||
/*
|
||||
* Speed of light in um per 1E-10 Seconds
|
||||
*/
|
||||
|
||||
#define VL53L0X_SPEED_OF_LIGHT_IN_AIR 2997
|
||||
|
||||
#define VL53L0X_REG_VHV_CONFIG_PAD_SCL_SDA__EXTSUP_HV 0x0089
|
||||
|
||||
#define VL53L0X_REG_ALGO_PHASECAL_LIM 0x0030 /* 0x130 */
|
||||
#define VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT 0x0030
|
||||
|
||||
/** @} VL53L0X_DefineRegisters_group */
|
||||
|
||||
/** @} VL53L0X_DevSpecDefines_group */
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
/* _VL53L0X_DEVICE_H_ */
|
||||
|
||||
|
||||
@@ -0,0 +1,402 @@
|
||||
/*
|
||||
* vl53l0x_i2c_platform.h - Linux kernel modules for STM VL53L0 FlightSense TOF
|
||||
* sensor
|
||||
*
|
||||
* Copyright (C) 2016 STMicroelectronics Imaging Division.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file VL53L0X_i2c_platform.h
|
||||
* @brief Function prototype definitions for EWOK Platform layer.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _VL53L0X_I2C_PLATFORM_H_
|
||||
#define _VL53L0X_I2C_PLATFORM_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
|
||||
|
||||
/** Maximum buffer size to be used in i2c */
|
||||
#define VL53L0X_MAX_I2C_XFER_SIZE 64
|
||||
|
||||
/**
|
||||
* @brief Typedef defining .\n
|
||||
* The developer should modify this to suit the platform being deployed.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Typedef defining 8 bit unsigned char type.\n
|
||||
* The developer should modify this to suit the platform being deployed.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef bool_t
|
||||
typedef unsigned char bool_t;
|
||||
#endif
|
||||
|
||||
|
||||
#define I2C 0x01
|
||||
#define SPI 0x00
|
||||
|
||||
#define COMMS_BUFFER_SIZE 64
|
||||
/*MUST be the same size as the SV task buffer */
|
||||
|
||||
#define BYTES_PER_WORD 2
|
||||
#define BYTES_PER_DWORD 4
|
||||
|
||||
#define VL53L0X_MAX_STRING_LENGTH_PLT 256
|
||||
|
||||
/**
|
||||
* @brief Initialise platform comms.
|
||||
*
|
||||
* @param comms_type - selects between I2C and SPI
|
||||
* @param comms_speed_khz - unsigned short containing the I2C speed in kHz
|
||||
*
|
||||
* @return status - status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_comms_initialise(uint8_t comms_type,
|
||||
uint16_t comms_speed_khz);
|
||||
|
||||
/**
|
||||
* @brief Close platform comms.
|
||||
*
|
||||
* @return status - status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_comms_close(void);
|
||||
|
||||
/**
|
||||
* @brief Cycle Power to Device
|
||||
*
|
||||
* @return status - status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_cycle_power(void);
|
||||
|
||||
int32_t VL53L0X_set_page(VL53L0X_DEV dev, uint8_t page_data);
|
||||
|
||||
/**
|
||||
* @brief Writes the supplied byte buffer to the device
|
||||
*
|
||||
* Wrapper for SystemVerilog Write Multi task
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint8_t *spad_enables;
|
||||
*
|
||||
* int status = VL53L0X_write_multi(RET_SPAD_EN_0, spad_enables, 36);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param pdata - pointer to uint8_t buffer containing the data to be written
|
||||
* @param count - number of bytes in the supplied byte buffer
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_write_multi(VL53L0X_DEV dev, uint8_t index, uint8_t *pdata,
|
||||
int32_t count);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Reads the requested number of bytes from the device
|
||||
*
|
||||
* Wrapper for SystemVerilog Read Multi task
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint8_t buffer[COMMS_BUFFER_SIZE];
|
||||
*
|
||||
* int status = status = VL53L0X_read_multi(DEVICE_ID, buffer, 2)
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param pdata - pointer to the uint8_t buffer to store read data
|
||||
* @param count - number of uint8_t's to read
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_read_multi(VL53L0X_DEV dev, uint8_t index, uint8_t *pdata,
|
||||
int32_t count);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Writes a single byte to the device
|
||||
*
|
||||
* Wrapper for SystemVerilog Write Byte task
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint8_t page_number = MAIN_SELECT_PAGE;
|
||||
*
|
||||
* int status = VL53L0X_write_byte(PAGE_SELECT, page_number);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param data - uint8_t data value to write
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_write_byte(VL53L0X_DEV dev, uint8_t index, uint8_t data);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Writes a single word (16-bit unsigned) to the device
|
||||
*
|
||||
* Manages the big-endian nature of the device (first byte written is the
|
||||
* MS byte).
|
||||
* Uses SystemVerilog Write Multi task.
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint16_t nvm_ctrl_pulse_width = 0x0004;
|
||||
*
|
||||
* int status = VL53L0X_write_word(NVM_CTRL__PULSE_WIDTH_MSB,
|
||||
* nvm_ctrl_pulse_width);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param data - uin16_t data value write
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_write_word(VL53L0X_DEV dev, uint8_t index, uint16_t data);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Writes a single dword (32-bit unsigned) to the device
|
||||
*
|
||||
* Manages the big-endian nature of the device (first byte written is the
|
||||
* MS byte).
|
||||
* Uses SystemVerilog Write Multi task.
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint32_t nvm_data = 0x0004;
|
||||
*
|
||||
* int status = VL53L0X_write_dword(NVM_CTRL__DATAIN_MMM, nvm_data);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param data - uint32_t data value to write
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_write_dword(VL53L0X_DEV dev, uint8_t index, uint32_t data);
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @brief Reads a single byte from the device
|
||||
*
|
||||
* Uses SystemVerilog Read Byte task.
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint8_t device_status = 0;
|
||||
*
|
||||
* int status = VL53L0X_read_byte(STATUS, &device_status);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param pdata - pointer to uint8_t data value
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_read_byte(VL53L0X_DEV dev, uint8_t index, uint8_t *pdata);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Reads a single word (16-bit unsigned) from the device
|
||||
*
|
||||
* Manages the big-endian nature of the device (first byte read is the MS byte).
|
||||
* Uses SystemVerilog Read Multi task.
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint16_t timeout = 0;
|
||||
*
|
||||
* int status = VL53L0X_read_word(TIMEOUT_OVERALL_PERIODS_MSB, &timeout);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param pdata - pointer to uint16_t data value
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_read_word(VL53L0X_DEV dev, uint8_t index, uint16_t *pdata);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Reads a single dword (32-bit unsigned) from the device
|
||||
*
|
||||
* Manages the big-endian nature of the device (first byte read is the MS byte).
|
||||
* Uses SystemVerilog Read Multi task.
|
||||
*
|
||||
* @code
|
||||
*
|
||||
* Example:
|
||||
*
|
||||
* uint32_t range_1 = 0;
|
||||
*
|
||||
* int status = VL53L0X_read_dword(RANGE_1_MMM, &range_1);
|
||||
*
|
||||
* @endcode
|
||||
*
|
||||
* @param address - uint8_t device address value
|
||||
* @param index - uint8_t register index value
|
||||
* @param pdata - pointer to uint32_t data value
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_read_dword(VL53L0X_DEV dev, uint8_t index, uint32_t *pdata);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Implements a programmable wait in us
|
||||
*
|
||||
* Wrapper for SystemVerilog Wait in micro seconds task
|
||||
*
|
||||
* @param wait_us - integer wait in micro seconds
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_platform_wait_us(int32_t wait_us);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Implements a programmable wait in ms
|
||||
*
|
||||
* Wrapper for SystemVerilog Wait in milli seconds task
|
||||
*
|
||||
* @param wait_ms - integer wait in milli seconds
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_wait_ms(int32_t wait_ms);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Set GPIO value
|
||||
*
|
||||
* @param level - input level - either 0 or 1
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_set_gpio(uint8_t level);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Get GPIO value
|
||||
*
|
||||
* @param plevel - uint8_t pointer to store GPIO level (0 or 1)
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_get_gpio(uint8_t *plevel);
|
||||
|
||||
/**
|
||||
* @brief Release force on GPIO
|
||||
*
|
||||
* @return status - SystemVerilog status 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_release_gpio(void);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Get the frequency of the timer used for ranging results time stamps
|
||||
*
|
||||
* @param[out] ptimer_freq_hz : pointer for timer frequency
|
||||
*
|
||||
* @return status : 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_get_timer_frequency(int32_t *ptimer_freq_hz);
|
||||
|
||||
/**
|
||||
* @brief Get the timer value in units of timer_freq_hz
|
||||
* (see VL53L0X_get_timestamp_frequency())
|
||||
*
|
||||
* @param[out] ptimer_count : pointer for timer count value
|
||||
*
|
||||
* @return status : 0 = ok, 1 = error
|
||||
*
|
||||
*/
|
||||
|
||||
int32_t VL53L0X_get_timer_value(int32_t *ptimer_count);
|
||||
int VL53L0X_I2CWrite(VL53L0X_DEV dev, uint8_t *buff, uint8_t len);
|
||||
int VL53L0X_I2CRead(VL53L0X_DEV dev, uint8_t *buff, uint8_t len);
|
||||
|
||||
#endif /* _VL53L0X_I2C_PLATFORM_H_ */
|
||||
|
||||
@@ -0,0 +1,194 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
#ifndef _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_
|
||||
#define _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
uint8_t InterruptThresholdSettings[] = {
|
||||
|
||||
/* Start of Interrupt Threshold Settings */
|
||||
0x1, 0xff, 0x00,
|
||||
0x1, 0x80, 0x01,
|
||||
0x1, 0xff, 0x01,
|
||||
0x1, 0x00, 0x00,
|
||||
0x1, 0xff, 0x01,
|
||||
0x1, 0x4f, 0x02,
|
||||
0x1, 0xFF, 0x0E,
|
||||
0x1, 0x00, 0x03,
|
||||
0x1, 0x01, 0x84,
|
||||
0x1, 0x02, 0x0A,
|
||||
0x1, 0x03, 0x03,
|
||||
0x1, 0x04, 0x08,
|
||||
0x1, 0x05, 0xC8,
|
||||
0x1, 0x06, 0x03,
|
||||
0x1, 0x07, 0x8D,
|
||||
0x1, 0x08, 0x08,
|
||||
0x1, 0x09, 0xC6,
|
||||
0x1, 0x0A, 0x01,
|
||||
0x1, 0x0B, 0x02,
|
||||
0x1, 0x0C, 0x00,
|
||||
0x1, 0x0D, 0xD5,
|
||||
0x1, 0x0E, 0x18,
|
||||
0x1, 0x0F, 0x12,
|
||||
0x1, 0x10, 0x01,
|
||||
0x1, 0x11, 0x82,
|
||||
0x1, 0x12, 0x00,
|
||||
0x1, 0x13, 0xD5,
|
||||
0x1, 0x14, 0x18,
|
||||
0x1, 0x15, 0x13,
|
||||
0x1, 0x16, 0x03,
|
||||
0x1, 0x17, 0x86,
|
||||
0x1, 0x18, 0x0A,
|
||||
0x1, 0x19, 0x09,
|
||||
0x1, 0x1A, 0x08,
|
||||
0x1, 0x1B, 0xC2,
|
||||
0x1, 0x1C, 0x03,
|
||||
0x1, 0x1D, 0x8F,
|
||||
0x1, 0x1E, 0x0A,
|
||||
0x1, 0x1F, 0x06,
|
||||
0x1, 0x20, 0x01,
|
||||
0x1, 0x21, 0x02,
|
||||
0x1, 0x22, 0x00,
|
||||
0x1, 0x23, 0xD5,
|
||||
0x1, 0x24, 0x18,
|
||||
0x1, 0x25, 0x22,
|
||||
0x1, 0x26, 0x01,
|
||||
0x1, 0x27, 0x82,
|
||||
0x1, 0x28, 0x00,
|
||||
0x1, 0x29, 0xD5,
|
||||
0x1, 0x2A, 0x18,
|
||||
0x1, 0x2B, 0x0B,
|
||||
0x1, 0x2C, 0x28,
|
||||
0x1, 0x2D, 0x78,
|
||||
0x1, 0x2E, 0x28,
|
||||
0x1, 0x2F, 0x91,
|
||||
0x1, 0x30, 0x00,
|
||||
0x1, 0x31, 0x0B,
|
||||
0x1, 0x32, 0x00,
|
||||
0x1, 0x33, 0x0B,
|
||||
0x1, 0x34, 0x00,
|
||||
0x1, 0x35, 0xA1,
|
||||
0x1, 0x36, 0x00,
|
||||
0x1, 0x37, 0xA0,
|
||||
0x1, 0x38, 0x00,
|
||||
0x1, 0x39, 0x04,
|
||||
0x1, 0x3A, 0x28,
|
||||
0x1, 0x3B, 0x30,
|
||||
0x1, 0x3C, 0x0C,
|
||||
0x1, 0x3D, 0x04,
|
||||
0x1, 0x3E, 0x0F,
|
||||
0x1, 0x3F, 0x79,
|
||||
0x1, 0x40, 0x28,
|
||||
0x1, 0x41, 0x1E,
|
||||
0x1, 0x42, 0x2F,
|
||||
0x1, 0x43, 0x87,
|
||||
0x1, 0x44, 0x00,
|
||||
0x1, 0x45, 0x0B,
|
||||
0x1, 0x46, 0x00,
|
||||
0x1, 0x47, 0x0B,
|
||||
0x1, 0x48, 0x00,
|
||||
0x1, 0x49, 0xA7,
|
||||
0x1, 0x4A, 0x00,
|
||||
0x1, 0x4B, 0xA6,
|
||||
0x1, 0x4C, 0x00,
|
||||
0x1, 0x4D, 0x04,
|
||||
0x1, 0x4E, 0x01,
|
||||
0x1, 0x4F, 0x00,
|
||||
0x1, 0x50, 0x00,
|
||||
0x1, 0x51, 0x80,
|
||||
0x1, 0x52, 0x09,
|
||||
0x1, 0x53, 0x08,
|
||||
0x1, 0x54, 0x01,
|
||||
0x1, 0x55, 0x00,
|
||||
0x1, 0x56, 0x0F,
|
||||
0x1, 0x57, 0x79,
|
||||
0x1, 0x58, 0x09,
|
||||
0x1, 0x59, 0x05,
|
||||
0x1, 0x5A, 0x00,
|
||||
0x1, 0x5B, 0x60,
|
||||
0x1, 0x5C, 0x05,
|
||||
0x1, 0x5D, 0xD1,
|
||||
0x1, 0x5E, 0x0C,
|
||||
0x1, 0x5F, 0x3C,
|
||||
0x1, 0x60, 0x00,
|
||||
0x1, 0x61, 0xD0,
|
||||
0x1, 0x62, 0x0B,
|
||||
0x1, 0x63, 0x03,
|
||||
0x1, 0x64, 0x28,
|
||||
0x1, 0x65, 0x10,
|
||||
0x1, 0x66, 0x2A,
|
||||
0x1, 0x67, 0x39,
|
||||
0x1, 0x68, 0x0B,
|
||||
0x1, 0x69, 0x02,
|
||||
0x1, 0x6A, 0x28,
|
||||
0x1, 0x6B, 0x10,
|
||||
0x1, 0x6C, 0x2A,
|
||||
0x1, 0x6D, 0x61,
|
||||
0x1, 0x6E, 0x0C,
|
||||
0x1, 0x6F, 0x00,
|
||||
0x1, 0x70, 0x0F,
|
||||
0x1, 0x71, 0x79,
|
||||
0x1, 0x72, 0x00,
|
||||
0x1, 0x73, 0x0B,
|
||||
0x1, 0x74, 0x00,
|
||||
0x1, 0x75, 0x0B,
|
||||
0x1, 0x76, 0x00,
|
||||
0x1, 0x77, 0xA1,
|
||||
0x1, 0x78, 0x00,
|
||||
0x1, 0x79, 0xA0,
|
||||
0x1, 0x7A, 0x00,
|
||||
0x1, 0x7B, 0x04,
|
||||
0x1, 0xFF, 0x04,
|
||||
0x1, 0x79, 0x1D,
|
||||
0x1, 0x7B, 0x27,
|
||||
0x1, 0x96, 0x0E,
|
||||
0x1, 0x97, 0xFE,
|
||||
0x1, 0x98, 0x03,
|
||||
0x1, 0x99, 0xEF,
|
||||
0x1, 0x9A, 0x02,
|
||||
0x1, 0x9B, 0x44,
|
||||
0x1, 0x73, 0x07,
|
||||
0x1, 0x70, 0x01,
|
||||
0x1, 0xff, 0x01,
|
||||
0x1, 0x00, 0x01,
|
||||
0x1, 0xff, 0x00,
|
||||
0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_ */
|
||||
@@ -0,0 +1,41 @@
|
||||
#ifndef VL53L0X_PLATFORM_H_
|
||||
#define VL53L0X_PLATFORM_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
#include "vl53l0x_platform_log.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define VL53L0X_MAX_I2C_XFER_SIZE 64
|
||||
|
||||
typedef struct {
|
||||
VL53L0X_DevData_t Data;
|
||||
uint8_t I2cDevAddr;
|
||||
int i2c_fd;
|
||||
} vl53l0x_dev_t;
|
||||
|
||||
typedef vl53l0x_dev_t *VL53L0X_DEV;
|
||||
|
||||
#define PALDevDataGet(Dev, field) (Dev->Data.field)
|
||||
#define PALDevDataSet(Dev, field, data) ((Dev->Data.field) = (data))
|
||||
|
||||
VL53L0X_Error VL53L0X_LockSequenceAccess(VL53L0X_DEV Dev);
|
||||
VL53L0X_Error VL53L0X_UnlockSequenceAccess(VL53L0X_DEV Dev);
|
||||
VL53L0X_Error VL53L0X_WriteMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count);
|
||||
VL53L0X_Error VL53L0X_ReadMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count);
|
||||
VL53L0X_Error VL53L0X_WrByte(VL53L0X_DEV Dev, uint8_t index, uint8_t data);
|
||||
VL53L0X_Error VL53L0X_WrWord(VL53L0X_DEV Dev, uint8_t index, uint16_t data);
|
||||
VL53L0X_Error VL53L0X_WrDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t data);
|
||||
VL53L0X_Error VL53L0X_RdByte(VL53L0X_DEV Dev, uint8_t index, uint8_t *data);
|
||||
VL53L0X_Error VL53L0X_RdWord(VL53L0X_DEV Dev, uint8_t index, uint16_t *data);
|
||||
VL53L0X_Error VL53L0X_RdDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t *data);
|
||||
VL53L0X_Error VL53L0X_UpdateByte(VL53L0X_DEV Dev, uint8_t index, uint8_t AndData, uint8_t OrData);
|
||||
VL53L0X_Error VL53L0X_PollingDelay(VL53L0X_DEV Dev);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,14 @@
|
||||
#ifndef VL53L0X_PLATFORM_LOG_H_
|
||||
#define VL53L0X_PLATFORM_LOG_H_
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#define VL53L0X_COPYSTRING(str, ...) strncpy(str, ##__VA_ARGS__, sizeof(str))
|
||||
|
||||
#define _LOG_FUNCTION_START(module, fmt, ...) (void)0
|
||||
#define _LOG_FUNCTION_END(module, status, ...) (void)0
|
||||
#define _LOG_FUNCTION_END_FMT(module, status, fmt, ...) (void)0
|
||||
|
||||
#define VL53L0X_ErrLog(...) (void)0
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,146 @@
|
||||
/*******************************************************************************
|
||||
* Copyright © 2016, STMicroelectronics International N.V.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
* Neither the name of STMicroelectronics nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
|
||||
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
#ifndef _VL53L0X_TUNING_H_
|
||||
#define _VL53L0X_TUNING_H_
|
||||
|
||||
#include "vl53l0x_def.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
uint8_t DefaultTuningSettings[] = {
|
||||
|
||||
/* update 02/11/2015_v36 */
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x00, 0x00,
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x09, 0x00,
|
||||
0x01, 0x10, 0x00,
|
||||
0x01, 0x11, 0x00,
|
||||
|
||||
0x01, 0x24, 0x01,
|
||||
0x01, 0x25, 0xff,
|
||||
0x01, 0x75, 0x00,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x4e, 0x2c,
|
||||
0x01, 0x48, 0x00,
|
||||
0x01, 0x30, 0x20,
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x30, 0x09, /* mja changed from 0x64. */
|
||||
0x01, 0x54, 0x00,
|
||||
0x01, 0x31, 0x04,
|
||||
0x01, 0x32, 0x03,
|
||||
0x01, 0x40, 0x83,
|
||||
0x01, 0x46, 0x25,
|
||||
0x01, 0x60, 0x00,
|
||||
0x01, 0x27, 0x00,
|
||||
0x01, 0x50, 0x06,
|
||||
0x01, 0x51, 0x00,
|
||||
0x01, 0x52, 0x96,
|
||||
0x01, 0x56, 0x08,
|
||||
0x01, 0x57, 0x30,
|
||||
0x01, 0x61, 0x00,
|
||||
0x01, 0x62, 0x00,
|
||||
0x01, 0x64, 0x00,
|
||||
0x01, 0x65, 0x00,
|
||||
0x01, 0x66, 0xa0,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x22, 0x32,
|
||||
0x01, 0x47, 0x14,
|
||||
0x01, 0x49, 0xff,
|
||||
0x01, 0x4a, 0x00,
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x7a, 0x0a,
|
||||
0x01, 0x7b, 0x00,
|
||||
0x01, 0x78, 0x21,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x23, 0x34,
|
||||
0x01, 0x42, 0x00,
|
||||
0x01, 0x44, 0xff,
|
||||
0x01, 0x45, 0x26,
|
||||
0x01, 0x46, 0x05,
|
||||
0x01, 0x40, 0x40,
|
||||
0x01, 0x0E, 0x06,
|
||||
0x01, 0x20, 0x1a,
|
||||
0x01, 0x43, 0x40,
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x34, 0x03,
|
||||
0x01, 0x35, 0x44,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x31, 0x04,
|
||||
0x01, 0x4b, 0x09,
|
||||
0x01, 0x4c, 0x05,
|
||||
0x01, 0x4d, 0x04,
|
||||
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x44, 0x00,
|
||||
0x01, 0x45, 0x20,
|
||||
0x01, 0x47, 0x08,
|
||||
0x01, 0x48, 0x28,
|
||||
0x01, 0x67, 0x00,
|
||||
0x01, 0x70, 0x04,
|
||||
0x01, 0x71, 0x01,
|
||||
0x01, 0x72, 0xfe,
|
||||
0x01, 0x76, 0x00,
|
||||
0x01, 0x77, 0x00,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x0d, 0x01,
|
||||
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x80, 0x01,
|
||||
0x01, 0x01, 0xF8,
|
||||
|
||||
0x01, 0xFF, 0x01,
|
||||
0x01, 0x8e, 0x01,
|
||||
0x01, 0x00, 0x01,
|
||||
0x01, 0xFF, 0x00,
|
||||
0x01, 0x80, 0x00,
|
||||
|
||||
0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _VL53L0X_TUNING_H_ */
|
||||
@@ -0,0 +1,13 @@
|
||||
#ifndef VL53L0X_TYPES_H_
|
||||
#define VL53L0X_TYPES_H_
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
|
||||
#ifndef NULL
|
||||
#define NULL 0
|
||||
#endif
|
||||
|
||||
typedef unsigned int FixPoint1616_t;
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user